Back to the Hackathon

E24-01 Intuitive CARing

To be added by students

JNTU HYDERABAD

0 Like

Project Info

Technologies Used

No stack info.

Project Team

vijayalode

jyostnakunapareddy

venkateswararao_p

bhaskarvemuri18

Saikiran Kasarla

saipramukh

Sneha D

This team is looking for

Product Manager Investor

REQUEST TO JOIN

About

INTUITIVE CARING (Intelligent caring for cars) •The objective of our product is to prevent the automatic car lock with car keys left inside. It sends a message to the registered mobile number after 30 seconds if the keys are left inside before the car gets locked. •It can also include a module which can detect accidents and thefts. For Accidents: Piezo-sensors detect the destruction of vehicle parts and sends the location of accident spot to the registered mobile number. For Theft: We can track the location of the car in case of theft through onboard GPS module •A rear parking sensor that facilitates safe parking. Senses all through 360 degree angle for prevention of collisions during parking. •It also includes sensors that detect distance of bumps /pits from current vehicle position which can prevent accidents. •By converting the traffic sound to electric energy we can also increase the battery performance.

Comments

bhaskarvemuri18 - 2900d

Completed the product.. waiting eagerly to demonstrate it to the jury tomorrow...

bhaskarvemuri18 - 2900d

Completed the product.. waiting eagerly to demonstrate it to the jury tomorrow...

bhaskarvemuri18 - 2900d

Completed the product.. waiting eagerly to demonstrate it to the jury tomorrow...

bhaskarvemuri18 - 2900d

Completed the product.. waiting eagerly to demonstrate it to the jury tomorrow...

bhaskarvemuri18 - 2900d

Completed the product.. waiting eagerly to demonstrate it to the jury tomorrow...

bhaskarvemuri18 - 2900d

Completed the product.. waiting eagerly to demonstrate it to the jury tomorrow...

bhaskarvemuri18 - 2900d

Completed the product.. waiting eagerly to demonstrate it to the jury tomorrow...

saipramukh - 2901d

Got valuable inputs from Radhika mam..working on presentations

saipramukh - 2902d

completed 80% of the job.Refining the task

saipramukh - 2903d

completed the individual modules .yet to work on integration of blocks

Sneha D - 2904d

today, we received our inventory but still it was incomplete. We programmed ultrasonic sensor and have to make some improvements. looking forward to completing the project as soon as possible and working hard at a faster pace.

Sneha D - 2906d

today, we have done programming of output lcd display and buzzers.. still not received inventory.. hardware implementation is delayed.

Rajender kumar Avvaru - 2907d

Today we have done intensive work on programming of sensors using python. Waiting for the components to start implementing.

saipramukh - 2909d

today we worked on programming raspberry pi for pressure sensor.

saipramukh - 2910d

we have started the design process.Updated the inventory list...divided the tasks among us.we started working on programming section..

bhaskarvemuri18 - 2911d

Initiated our implementation and completed the first phase...

Sneha D - 2915d

We have filled the product plan gantt chart and the NPP(new product proposal). Completed installing OS into raspberry pi and looking forward to experimenting with temperature sensor.

bhaskarvemuri18 - 2915d

Initiated our project by creating project plan and have developed project proposal.

bhaskarvemuri18 - 2916d

Extended our work on raspberry pi...

bhaskarvemuri18 - 2917d

Started using raspberry pi..we have set up and updated the raspbian operating system

bhaskarvemuri18 - 2918d

Learned some basics about raspberry pi. Listed our inventory and mailed them.

bhaskarvemuri18 - 2920d

The sessions were very interesting. In the morning we got an idea about design procedure which has three modules..information,interaction and interface. In the afternoon session we took our idea a step ahead by drawing task flow.

bhaskarvemuri18 - 2921d

Extended our mind map further and created the use cases. It was very interesting and helping a lot to improvise our product.

bhaskarvemuri18 - 2920d

The sessions were very interesting. In the morning we got an idea about design procedure which has three modules..information,interaction and interface

bhaskarvemuri18 - 2922d

Today we understood the concepts of product designing. In the afternoon session we performed interesting activities like mind mapping and persona building.

vijayalode - 2923d

write description about your idea

Sneha D - 2923d

INTUITIVE CARING Intelligent caring for cars • The objective of our product is to prevent the automatic car lock with car keys left inside. o It sends a message to the registered mobile number after 30 seconds if the keys are left inside before the car gets locked. • It can also include a module which can detect accidents and thefts. For Accidents Piezosensors detect the destruction of vehicle parts and sends the location of accident spot to the registered mobile number For Theft We can track the location of the car in case of theft through onboard GPS module • A rear parking sensor that facilitates safe parking. o Senses all through 360 degree angle for prevention of collisions during parking. • It also includes sensors that detect distance of bumps /pits from current vehicle position which can prevent accidents. • By converting the traffic sound to electric energy we can also increase the battery performance.

bhaskarvemuri18 - 2923d

We understood various marketing strategies and interacted with various entrepreneurs. We finalised our project too..

bhaskarvemuri18 - 2925d

Today we understood various aspects about the product necessity and its value. By meeting various entrepreneurs we came to know their experiences and it changed our way of perception a lot.

jyostnakunapareddy - 2927d

We discussed further about the project and are refining the contents.

jyostnakunapareddy - 2928d

The project title has been accepted. We have come up with two more ideas to the existing project. 1. Prevention of accidents at junctions - a pole can be placed at the junction that is embedded with sensors, buzzers and lights. 2. Avoidance of vehicle collisions on highways- camera based radar can be used that avoids collisions by raising an alarm based on distance of the front vehicle. 3. We are also looking at another problem which avoids accidents due to parked vehicles on highways

venkateswararao_p - 2928d

Day -2 activity - product design ppt by RMS and out bound exercise by RMS [ fore noon ] - product idea evaluation by RMS and marketing ppt ans some inspirational videos on product developments [ post lunch ]