E13-02 MOISTURE LEVEL MONITORING
measures the moisture level present in the soil.
JNTU HYDERABAD
Technologies Used
Project Team
About
This project uses Arduino Uno to controls the motor. It has an Arduino board, which consists of ATmega328 Microcontroller. It is programmed in such a way that it will sense the moisture level of the plants and supply the water if required. The moisture sensor measures the level of moisture in the soil and sends the signal to the Arduino if watering is required. The motor/water pump supplies water to the plants until the desired moisture level is reached. https://drive.google.com/file/d/0B9uXSgRK28NMYlRKSlVkajBUV0U/view?usp=sharing
Comments
chiranjeevi.yarabolu - 2897d
chiranjeevi.yarabolu - 2903d
chiranjeevi.yarabolu - 2903d
chiranjeevi.yarabolu - 2903d
chiranjeevi.yarabolu - 2903d
chiranjeevi.yarabolu - 2903d
chiranjeevi.yarabolu - 2904d
chiranjeevi.yarabolu - 2907d
chiranjeevi.yarabolu - 2908d
chiranjeevi.yarabolu - 2909d
chiranjeevi.yarabolu - 2909d
chiranjeevi.yarabolu - 2910d
chiranjeevi.yarabolu - 2912d
chiranjeevi.yarabolu - 2913d
chiranjeevi.yarabolu - 2914d
chiranjeevi.yarabolu - 2915d
chiranjeevi.yarabolu - 2916d
chiranjeevi.yarabolu - 2916d
chiranjeevi.yarabolu - 2916d
chiranjeevi.yarabolu - 2916d
chiranjeevi.yarabolu - 2916d
chiranjeevi.yarabolu - 2918d
chiranjeevi.yarabolu - 2920d
chiranjeevi.yarabolu - 2920d
sanjeeva.ssp - 2921d
chiranjeevi.yarabolu - 2895d